2022 LiuGong Medium Wheel Loaders 856H
EXPERIENCE HIGHER CONTINUOUS POWERThe 856H Wheel Loader boasts an advanced climate control system with eight all-round vents, 5 selection modes and 6 kW of cooling capacity, creates the perfect working environment whatever the weather.
Features may include:
Power Without Waste- Environmental as well as economic awareness lie at the heart of our new 856H. Powered by the latest fuel efficient Cummins engine, it has a net power rating of 160 kW (215 hp) @ 2,000 rpm and fully complies with EU Stage IV emission standards without compromising on power or performance. For operational efficiency, the engine uses a precise, high pressure common-rail fuel injection system, turbo charger (VGT) and air- to-air intercooler, along with electronic engine controls to deliver optimal performance in every cycle in every shift. Engine emissions are virtually eliminated by NOx and Dual reduction Technology, ensuring that the 856H delivers, both for the environment and the bottom line.
- Our hydraulic system delivers an impressively high breakout force of 175 kN with control and precision delivering power to where the operator really needs it. Lifting and cycle speeds are equally impressive at 5.9 seconds and 10.3 seconds, respectively. This is power where you need it, improving penetration, allowing simultaneous lift and tilt functions to be executed and reducing hydraulic waste.
- Heavyweight work can be tough on man and machine. LiuGong’s next generation ride control, teamed with automated bucket positioning sets the new benchmark for heavy lifting applications. Loading shocks and impacts are greatly reduced, that’s good news for operators and for the machine’s longevity. Smoother load handling and maneuverability around the site has been noticeably improved with material spillage greatly reduced, leading to faster, more productive cycle times, reduced fuel consumption and higher operator performance and satisfaction.
- The 856H’s automatic powershift transmission helps even the newest operator perform like a fuel wise professional matching the machine’s performance perfectly to the job, whatever that job may be. Three selectable options; Manual, Semi-auto and Full auto, make it easier to do the job better, saving time and reducing fuel and emissions. The lock up clutch torque converter also aids performance fuel economy by delivering the maximum amount of power to the transmission.
- 2022
- LiuGong
- Medium Wheel Loaders
- 856H
- Medium
- Model: QSB6.7
- Regulation: Tier 4 Final / Stage IV
- Cummins
- Max gross: 225 hp (168 kW) @ 2,100 rpm | Max net: 215 hp (160 kW) @ 2,100 rpm
- Peak: 1,106 lb-ft (1,500 N-m) @ 1,400 rpm
- 409 in3 (6.7 L)
- 6
- Turbocharged & air-to-air intercooled
- Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 23.7 mph (38.1 km/h) | Maximum travel speed, rev: 14.9 mph (23.9 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
- Limited slip
- Limited slip
- Configuration: Articulated
- Type: Wet discs, two independent circuits | Actuation: Hydraulic
- Type: Manual electronic control | Actuation: Hydraulic
- Width over tires: 9 ft 0 in (2,750 mm) | 23.5R25 L3 tire
- Width over tires: 9 ft 0 in (2,750 mm) | 23.5R25 L3 tire
- Bucket breakout force: 40,275 lbf (179 kN)
- Steering pressure: 2,756 psi (19 MPa) | System pressure: 3,191 psi (22 MPa)
- Piston
- Raise: 5.7 s | Dump time: 1.3 s | Float down time: 3.0 s | Total cycle time: 10.0 s
- Axle oscillation: ±12° | Bucket rollback at ground level: 43° | Bucket rollback at carry: 48° | Turn angle, either side: 38° | Rear angle of departure: 27°
- Maximum hinge pin height: 13 ft 2 in (4,028 mm) | Dump clearance at full height discharge: 9 ft 8 in (2,948 mm) | Dump reach at full height discharge: 3 ft 8 in (1,129 mm) | Bucket rollback at maximum height: 58° | Maximum dump angle at full height: 45° | Cab height: 11 ft 3 in (3,450 mm)
- Maximum digging depth, bucket level: 3 in (85 mm)
- 17 in (431 mm)
- 10 ft 10 in (3,320 mm)
- Wheel tread: 7 ft 0 in (2,150 mm)
- With bucket down: 27 ft 3 in (8,318 mm)
- bucket carry: 22 ft 9 in (6,954 mm)
- of tire: 20 in 4 in (6,205 mm)
- over bucket: 9 ft 10 in (2,976 mm)
- Bucket capacity: 4.2 yd3 (3.2 m3 )
- Tipping load - straight: 28,219 lb (12,700 kg) | Tipping load - full turn: 24,250 lb (11,000 kg)
- Tank: 79.2 (300 L) | Transmission: 11.8 gal (45 L) | DEF tank: 5.0 gal (19 L)
- 4.7 gal (18 L)
- 11.6 gal (44 L)
- 62.3 gal (236 L)
- Axles, each: 11.6 gal (44 L)
- Axles, each: 11.6 gal (44 L)
- Operating: 42,540 lb (19,296 kg)
- $127,000.00
- Arlington Heights
- Pre-Owned
- 2022
- LiuGong
- Medium Wheel Loaders 856H
- L701590
- Model: QSB6.7
- 215
- 1620
- Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 23.7 mph (38.1 km/h) | Maximum travel speed, rev: 14.9 mph (23.9 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
- Diesel
- Available
- over bucket: 9 ft 10 in (2,976 mm)
- Maximum hinge pin height: 13 ft 2 in (4,028 mm) | Dump clearance at full height discharge: 9 ft 8 in (2,948 mm) | Dump reach at full height discharge: 3 ft 8 in (1,129 mm) | Bucket rollback at maximum height: 58° | Maximum dump angle at full height: 45° | Cab height: 11 ft 3 in (3,450 mm)